Convey

Short text

Sliding Door Guide, 29x16x18, Plastic PA reinforced, grey

Sliding Door Guide, 29x16x18, Plastic PA reinforced, grey, To guide lift or sliding doors in the slot of an aluminum profileto insert in the frame corner connector 18 x 32 for clamp profile

From €7.21*

Details

Bearing Set, 127x94x39, Steel, zink plated

Bearing Set, 127x94x39, Steel, zink plated, To build sliding doors to linearly guide small loadsplastic roller with slide bearings runs directly on the aluminum of the slot with D=14 mm

From €49.88*

Details

Bearing Set, 127x87x39, Steel, zink plated

Bearing Set, 127x87x39, Steel, zink plated, To build sliding doors to linearly guide loadssteel roller with ball bearings runs directly on shaft D=14 mm

From €76.49*

Details

Bearing Set, 207x39x86, Steel, zink plated

Bearing Set, 207x39x86, Steel, zink plated, To build sliding doorsTo linearly guide loadsSteel roller with ball bearings runs directly on shaft D=14 mmTo tighten the eccentric screw, a pin spanner is needed for the four holes of the adjusting washer

From €148.68*

Details

Bearing Set, 119x62x30, Plastic PA, black

Bearing Set, 119x62x30, Plastic PA, black, For the construction of bearing unitsassembly with machining to C-slide profile ITo linearly guide small loadsplastic roller with slide bearings runs directly on the aluminum of the slot with D=14 mm

From €29.06*

Details

Bearing Set, 119x62x46, Steel, zink plated

Bearing Set, 119x62x46, Steel, zink plated, For the construction of bearing unitsAssembly with machining to C-slide profile ITo linearly guide loadsSteel roller with ball bearings runs directly on shaft D=14 mm

From €51.29*

Details

Bearing Set, 199x31x46, Steel, zink plated

Bearing Set, 199x31x46, Steel, zink plated, For the construction of bearing unitsAssembly with machining to C-slide profile ITo linearly guide loadsSteel rollers with ball bearings runs directly on shaft D=14 mmTo tighten the eccentric screw, a pin spanner is needed for the four holes of the adjusting washer

From €126.07*

Details

Trolley, 50x35x24, Plastic PA, black

Trolley, 50x35x24, Plastic PA, black, For moving suspended sliding doors built of slot 8 profiles in slot 10 rail profile

From €15.45*

Details

Trolley, 82x68x38, Aluminum die-cast, blanc, aluminum colored

Trolley, 82x68x38, Aluminum die-cast, blanc, aluminum colored, To build towing trolleys with aluminum profile 40For hanging cables or lines optional tool hangers can be inserted into the slot of the aluminum profileBall bearing guide of the trolley in the overhead C-monorail

From €56.74*

Details

Roller, D=19x9.8, Plastic PA glass ball reinforced, black

Colour: black | Size (in mm): D=19 - Nut 5

Roller, D=19x9.8, Plastic PA glass ball reinforced, black, To guide moving parts in the slot of the aluminum profile Slot 5

From €2.94*

Details

Sliding Door Guide, 40x40x49.5, Aluminum, blanc, aluminum colored

Selection: 40 | Slot: 8

Sliding Door Guide, 40x40x49.5, Aluminum, blanc, aluminum colored, To connect two aluminum profiles at right angles and to guide lift or sliding doors in the slot of an aluminum profilewith ball bearingspacers can be changed: for a 2 mm distance between door and fixed'profile or a 2 or 4 mm distance between two doorswith 3 spacer

From €14.21*

Details

Docking Clip, 66x39x34, Plastic PA, grey

Docking Clip, 66x39x34, Plastic PA, grey, For quick plug-in of roller tracks I 60x24 in the lateral connectors of flow beds of live storage shelvingsChannel width can be adjusted horizontally in steps

From €1.88*

Details

Holding Bracket XST, 93x36x32, Steel, zink plated

Selection: Ohne Anschlag

Holding Bracket XST, 93x36x32, Steel, zink plated, To mount roller tracks XST and guiding rails XST central to profiles 40 mmPreventing inserts from slipping out

From €4.12*

Details

Stop Buffer M, 25x20x20, Natural rubber (NR) approx. 55 Shore A, black

Selection: Höhe 15 - zylindrisch | Threat: M6 Außengewinde

Stop Buffer M, 25x20x20, Natural rubber (NR) approx. 55 Shore A, black, End-position damping of doors, flaps, covers, working pieces or goods

From €2.15*

Details

Roller Element, 80x40x20, Plastic, black

Selection: Ohne Seitenführung

Roller Element, 80x40x20, Plastic, black, For manufacturing roller conveyors in any width and lengthClip-Fix System provides for quick assembly without any need for tools

From €2.75*

Details

Transition Ramp, 40,5x32x3,7, Plastic PA reinforced, black

Transition Ramp, 40,5x32x3,7, Plastic PA reinforced, black, Provides a smooth transition between aluminum profile and transition ramp I

From €2.82*

Details

Bearing Block, 33,8x31,8x10, Plastic PA reinforced, black

Bearing Block, 33,8x31,8x10, Plastic PA reinforced, black, To engage the bearings of a support roller I D32Mounting sideways in the slot 8 of the aluminum profile

From €4.95*

Details

Bearing Set, D32x39, Plastic PA reinforced, black

Bearing Set, D32x39, Plastic PA reinforced, black, To build a support roller from one piece of tube D32 made of aluminum or plasticThe lateral ball bearings are inserted in two bearing blocks on the aluminum profiles

From €5.46*

Details

Bearing, D50x40, Plastic PA reinforced, black

Bearing, D50x40, Plastic PA reinforced, black, To create a support roller I D50Ball beared, with circulating slot for D 4 mm round belt driveWith spring-loaded fastening bolt for subsequent inserting

From €11.70*

Details

Backlock, 72x50x40, Zinc die-cast, blanc

Selection: Sperrklinke Kunststoff

Backlock, 72x50x40, Zinc die-cast, blanc, For preventing backwards movement of tool carrier

From €53.86*

Details

Holder, Holding Bracket I, 95x64x36, Steel, zink plated

Selection: Ohne Anschlag

Holder, Holding Bracket I, 95x64x36, Steel, zink plated, To mount roller tracks I 60x24 40 to profiles 40 mm

From €4.55*

Details

Arm, Swivel Caster, 185x65x80, Steel, powder-coated, aluminum colored

Arm, Swivel Caster, 185x65x80, Steel, powder-coated, aluminum colored, to mount 360° rotating swivel casters with bolt hole pattern in the back - also with double system brakehigher stability against overturning due to lower center of gravity, icl. Side impact protectionSwivel caster arm can be attached lateral, transverse, or on the face of the profileif attached on the front face, the core hole of the respective profile must be M8 threaded (min. 15 mm deep)

From €26.04*

Details

Roller, Leveling Caster, D50, Plastic PA, black

Dim H in mm: 84

Roller, Leveling Caster, D50, Plastic PA, black, reliable leveling caster with bolt hole thread M12 for fixation to transport and base plates, threaded sleeves or threaded bushesRoller movement locking by temporary positioning on stamp, actuation of the height adjustment of the stamp via adjustement wheel in the caster housing with wrenchBolt hole plate: Steel, zinc platedHousing: Aluminum die-cast, white aluminum powder coatedAdjustment wheel: Plastic PA, orangeStamp: Rubber NBR, blackRoller: Plastiv PA, black

From €41.08*

Details

Roller, Leveling Caster, D62, Plastic PA, black

Roller, Leveling Caster, D62, Plastic PA, black, reliable leveling caster with integrated mounting plate for fixation to aluminum profiles with modular dimension 40 and 45 mm without overhangNo additional transport and base plate neededRoller movement locking by temporary positioning on stamp, actuation of the height adjustment of the stamp via adjustment wheel in the caster housing with wenchMounting plate: Steel, zinc platedHousing: Aluminum die-cast, white aluminum powder coatedAdjustment wheel: Plastic PA, orangeStamp: Rubber NBR, blackRoller: Plastic PA, black

From €47.93*

Details

Plate, Adapter Plate, 40x40, Zinc die-cast, powder-coated, aluminum colored

From €1.59*

Details

Plate, Adapter Plate, 40x40, Zinc die-cast, powder-coated, aluminum colored

From €1.59*

Details

Plate, Adapter Plate, 45x45, Zinc die-cast, powder-coated, aluminum colored

From €1.59*

Details

Plate, Adapter Plate, 40x40, Zinc die-cast, powder-coated, aluminum colored

From €1.59*

Details

Plate, Adapter Plate, 40x40, Zinc die-cast, powder-coated, aluminum colored

From €1.59*

Details

Plate, Adapter Plate, 45x45, Zinc die-cast, powder-coated, aluminum colored

From €1.59*

Details

Bearing Unit, 60x58x58, Aluminum / steel

Selection: excentrisch einstellbar

Bearing Unit, 60x58x58, Aluminum / steel, To build sliding carriagesTo linearly guide loadsSteel roller with ball bearings runs directly on shaft Ø 14 mmCompletely pre-assembled from roller profile I slot 8To tighten the eccentric screw, a pin spanner is needed for the four holes of the adjusting washer

Variants from €11.22*

From €50.86*

Details

Roller Mounting Block, 50x18x12, Plastic PA reinforced, black

ESD: No | Selection: Ohne Montageset

Roller Mounting Block, 50x18x12, Plastic PA reinforced, black, To mount track rollers on aluminum profilesIndividual rollers can be replaced without dismantling the entire systemCan be used for slot 8 and slot 10 by simply turning it

From €1.31*

Details

Roller, Swivel Caster, D75, Wheel Body PP, grey

ESD: No

Roller, Swivel Caster, D75, Wheel Body PP, grey, Reliable and quiet swivel caster, trackless, with thread guard; can be directly fixed to aluminum profiles or with an additional transport and base plateHousing: Steel, powder coatedTread: TPE, grayWheel body: PP, grayfor end face mounting, a suitable thread must be cut into the core hole

From €11.53*

Details

Roller Element, 80x40x20, Plastic, black

ESD: No | Selection: Ohne Seitenführung

Roller Element, 80x40x20, Plastic, black, For manufacturing roller conveyors in any width and length, incl. 2 Screws M5 x 25

From €2.75*

Details

Roller, Swivel Caster, D75, Wheel Body PP, grey

ESD: No

Roller, Swivel Caster, D75, Wheel Body PP, grey, reliable and quiet swivel caster, trackless, with thread guard; can be directly fixed to aluminum profiles or with an additional transport and base plateHousing: Steel, powder coatedTread: TPE, grayWheel body: PP, grayfor end face mounting, a suitable thread must be cut into the core hole

From €13.01*

Details

Roller, Swivel Caster, D80, Wheel Body PA, grey

ESD: No | Tread material: D80, PU, schwarz

Roller, Swivel Caster, D80, Wheel Body PA, grey, reliable and quiet swivel caster, trackless with ball bearings and thread guard integrated mounting plate for fixation to aluminum profiles with modular dimension 40 and 45 mm without overhang no additional transport and base plate neededroller movement locking by temporary positioning on lifting foot, actuation of the height adjustment of the lifting foot via foot pedal on the swivel caster housingHousing: Die-cast aluminum, alu color, powder coated / steel, zinc platedTread: PU, blackWheel body: PA, grayMounting plate:Steel, zinc platedLeveling foot: Plastic PA, glass ball reinforced / steel, zinc platedFoot pedal: Plastic, black

Variants from €124.34*

From €124.55*

Details

Convey

Hier bitte den Langtext-Englisch rein kopieren